Features of carbon fiber infrared heat lamps

 

1. High electrothermal conversion efficiency and significant energy-saving effect
The carbon fiber heating element is a pure black body material. During the electric-heat conversion process, the visible light is very small, and the electric-heat conversion efficiency is more than 95%. Compared with nickel-chromium, tungsten-molybdenum and other materials as heaters, it can save energy by 30%;
Under the same power, the radiation temperature of the carbon fiber heating tube is 30℃ higher than that of the nickel-chromium metal electric heating tube and 15℃ higher than that of the tungsten molybdenum wire quartz electric heating tube.

2. No instant current impact
The ignition does not require a ballast, and there is no pulse current impact when starting, which simplifies the lighting power supply and protection circuit, and prolongs the service life of the power supply and related electrical appliances.

3. The high heat radiation direction can improve the design of directional heat radiation.

4. Environmental protection
No light pollution, no eye irritation and skin burns; no ultraviolet radiation, harmful gases, and high-frequency radiation.

5. High infrared radiation efficiency
Carbon fiber infrared quartz heating tube infrared wavelength range between 8-15μm, electric heating radiation conversion efficiency ≥ 90%.
Carbon fiber infrared quartz heating tube compared with the infrared of the metal heating element, the organic matter absorption wavelength, and infrared radiation intensity are respectively increased by more than 30%. The heater made by heating has the function of promoting human blood circulation due to the high intensity of infrared radiation, which is beneficial to human health and is known as a healthcare heater.

6. Strong acid and corrosion resistance
Quartz glass is a good acid-resistant material (except hydrofluoric acid), which is 30 times that of acid-resistant ceramics and more than 100 times that of stainless steel (nickel-chromium alloy).

7. The service life is more than 8000 hours.

8. Strong resistance to sudden changes in cold and heat
The quartz glass tube was heated to 1100 degrees and quickly dropped into cold water without any abnormalities.

评论

发表评论

此博客中的热门博文

Features of Frosted Infrared heating tubes

图片
  30 2021-05 Features of Frosted Infrared heating tubes  Contact us 1. Energy-saving heating method. Near-infrared short-wave halogen heating lamp tubes can convert electrical energy into heat energy, which is much higher than traditional heating methods. 2. The new heating method directly heats the object without heating the air around the object; it can directly heat the object in a vacuum environment. In the traditional heating method, the problem of loss during heat transfer between the heat source and the heating object. 3. High-quality quartz tubing is a high-temperature material. , It has good suckability in a high-temperature environment, will not produce explosion tubes, and the safety level is very high. 4.  Anti-glare  effect The special high-quality frosted quartz tube used by Reyuan Company has an anti-glare effect. After the lamp is lit, it can radiate a beautiful rose-red light, which is relatively soft and can protect the eyes to a certain extent. 5. Swift response tim
阅读全文

The wiring method of infrared heating tube

图片
  1\ The infrared heating tube is a resistance heating tube. When connecting to DC power, there is no distinction between positive and negative poles. When the rated voltage is 220V, the heating tube is connected to 220V AC. The 220V connection method is also called "Star connection". First divide the heating tubes into three groups of equal number, then connect one end of the three groups of heating tubes to a common point, and then connect the other ends of the three groups of heating tubes to the three power lines of the three-phase power supply. Protective measures. This process must ensure that the power and quantity of the three sets of heating tubes are the same. Otherwise, the center store will shift and the heating tube will be burnt out. 2\ When the heating tube is connected to 380V industrial power, the voltage and the zero line must be confirmed first. It should be noted that if the rated voltage of the heating tube is confused, the heating tube will burn out or t
阅读全文